Tato stránka Často kladených dotazů, kterou se pokoušíte navštívit, ještě nebyla přeložena do tohoto jazyka. Než bude přeložená verze dostupná, budete mít k dispozici anglickou verzi

Setting up a static IP address for PC

Your PC IP address can be set up to be either static or dynamic

Dynamic IP addresses change each time you restart your PC or router. If you have settings that rely on the IP address to stay the same, such as port forwarding, they will no longer work because the IP address has changed.

Static IP addresses do not change. This is why we recommend setting up a static IP in our connectivity troubleshooting guides.

To set up a static IP address:
 
•  Open the Control panel.
You can locate the control panel using the search bar in your system tray.
•  Select Network and internet, then Network and sharing center.
•  Click on your active connection to open the Status menu.

•  Select Details. A Network connection details window will open.
•  Make a note or take a screenshot of this information, as you will need the details later, and close the window to return to the Status screen.

•  Select Properties.
You may need administrative rights to do this.
•  Highlight Internet protocol version 4 (TCP/IPv4) and click Properties.
•  Select Use the following IP address and enter the information you took note of earlier.
You do not need to enter an alternate DNS server.


•  Check the Validate settings on exit box and click Okay
•  Restart your PC. 

To reverse these settings, choose Obtain an IP address automatically in the Internet Protocol Version 4 properties window.

If you need further assistance setting up a static IP, we recommend that you contact Microsoft directly.

Let us know if you have any questions!

Přidružené platformy

BYLO TO UŽITEČNÉ?

Děkujeme za Vaši zpětnou vazbu. Děkujeme za Vaši zpětnou vazbu. Omlouváme se, že Vám to nepomohlo.
Prosím pošlete dotaz a řekněte nám, jak vám můžeme pomoci.