Multiplayer Connection Issues In Far Cry 4 (PlayStation 3)
Test your connection to the InternetStart by testing your network connection with the following steps: 1. Start at the PS3 XMB. 2. Scroll to Settings. 3. Choose Network Settings. 4. Select Internet Connection Test. Performing the Network connection test on PS3If this test shows your connection as NAT type 3, then you will most likely have some sort of interference within your connection to the online servers. In this case, please move onto the next step. Restart your network hardware1. Turn off your PlayStation 3 and your Modem/Router and wait for 15 - 30 seconds. 2. Fully power up your Modem/Router (it may take a couple of minutes to re-establish your connection). 3. Turn on your PlayStation 3 and test the connection again by following the steps at the beginning of the article. Port ForwardingAt this point if you still have trouble then you may have a firewall interfering with your connection. Please configure the following network ports within your router from your PC: Game Ports: TCP: 80, 443 UDP: 9000, 21120 Example of port forwarding, this is done from your PC and will differ between devices Directions for configuring network ports are specific to the hardware being used, and can be found by visiting the manufacturers website. There are also free resources available such as Port Forward which may help (you can skip the ad to get to the guides). Please note this site is not affiliated with Ubisoft. DMZIf this does not solve your issue, try placing your PlayStation 3 in the DMZ of the router or establishing a direct connection to your modem (where available) and retry. Traffic throttling / Blocked portsThere may also be certain restrictions set by your Internet Service Provider (ISP). If you continue to have trouble, please contact your ISP for details on any specific restrictions on the previously mentioned network ports. Still having problems?If you continue to have trouble after completing the above steps, please contact support and include a full description of your problem along with any error messages you may have received.